Water lubrication single-stage compression frequency conversion series
Feature: Screw block with single stage air compression
Advantages: Low compression level Low temperature rise Low air leakage Integrated shaft (direct drive) Benefit: 5% energy saving Feature: IE4 Permanent Magnet Motor / WEG Brand High Efficiency IE4 Motor Optional oil cooled engine Advantages : Engine efficiency 97% Benefit: 5% energy saving
Product advantages
Feature
Feature: Dual VFD System Benefits : Constant pressure output to eliminate pressure fluctuations and load shedding Constant outlet temperature at 80-85℃ Low inrush current to protect components Benefit: 15% energy savings
Benefits
Feature: Screw block with single stage air compression Advantages: Low compression level Low temperature rise Low air leakage Integrated shaft (direct drive) Benefit: 5% energy saving
Advantages
Feature: Dual VFD System Benefits : Constant pressure output to eliminate pressure fluctuations and load shedding Constant outlet temperature at 80-85℃ Low inrush current to protect components Benefit: 15% energy savings
Technical Parameters
| Model | Maximum Working Pressure | DURATION | KW Motor Power | dB noise | Cooling water inlet and outlet diameter | Cooling Water Inlet Water Temperature-Desaturation 32% | coolant L | Dimensiones L*W*H mm | Weight kg | Inch air outlet | ||
| bar | psig | m³/min | cfm | |||||||||
| SW-06A/W | 8 | 116 | 0.78 | 27.5 | 5.5 | 58 | 3/4″ | 1.5 | 10 | 800X800X1200 | 430 | 3/4″ |
| 10 | 145 | 0.65 | 21.18 | |||||||||
| SW-08A/W | 8 | 116 | 1.15 | 40.6 | 7.5 | 58 | 3/4″ | 2 | 10 | 800X800X1200 | 470 | 3/4″ |
| 10 | 145 | 1.02 | 36 | |||||||||
| 12.5 | 181 | 0.81 | 28.6 | |||||||||
| SW-11A/W | 8 | 116 | 1.55 | 54.7 | 11 | 60 | 1″ | 2.5 | 26 | 1150X755X1340 | 580 | 3/4″ |
| 10 | 145 | 1.32 | 46.6 | |||||||||
| 12.5 | 181 | 1.01 | 35.7 | |||||||||
| SW-15A/W | 8 | 116 | 2.30 | 81.2 | 15 | 63 | 1″ | 3.5 | 26 | 1150X755X1340 | 650 | 3/4″ |
| 10 | 145 | 2.12 | 74.8 | |||||||||
| 12.5 | 181 | 1.60 | 56.5 | |||||||||
| SW-18A/W | 8 | 116 | 3.10 | 109.4 | 18.5 | 65 | 1″ | 4 | 30 | 1400X900X1450 | 705 | 1″ |
| 10 | 145 | 2.62 | 92.5 | |||||||||
| 12.5 | 181 | 2.10 | 74.1 | |||||||||
| SW-22A/W | 8 | 116 | 3.42 | 120.7 | 22 | 65 | 1″ | 5 | 30 | 1400X900X1450 | 745 | 1″ |
| 10 | 145 | 3.15 | 111.2 | |||||||||
| 12.5 | 181 | 2.62 | 92.5 | |||||||||
| SW-30A/W | 8 | 116 | 5.05 | 178.3 | 30 | 67 | 1 1/2″ | 7 | 40 | 1550X1150X1550(A) | 1100 | 1 1/4″ |
| 10 | 145 | 4.20 | 148.3 | |||||||||
| 12.5 | 181 | 3.18 | 112.3 | 1500X1150X1300(W) | ||||||||
| SW-37A/W | 8 | 116 | 6.10 | 215.3 | 37 | 67 | 1 1/2″ | 9 | 40 | 1550X1150X1550(A) | 1150 | 1 1/4″ |
| 10 | 145 | 5.25 | 185.3 | |||||||||
| 12.5 | 181 | 4.85 | 171.2 | 1500X1150X1300(W) | ||||||||
| SW-45A/W | 8 | 116 | 7.60 | 268.3 | 45 | 68 | 1 1/2″ | 10 | 90 | 1980X1300X1760(A) | 1390 | 2″ |
| 10 | 145 | 6.15 | 217.1 | |||||||||
| 12.5 | 181 | 5.65 | 199.4 | 1800X1300X1680(W) | ||||||||
| SW-55A/W | 8 | 116 | 9.60 | 338.9 | 55 | 70 | 1 1/2″ | 12 | 120 | 1980X1300X1760(A) | 1470 | 2″ |
| 10 | 145 | 8.55 | 301.8 | |||||||||
| 12.5 | 181 | 7.45 | 263.0 | 1800X1300X1680(W) | ||||||||
| SW-75A/W | 8 | 116 | 13.00 | 458.9 | 75 | 73 | 1 1/2″ | 18 | 120 | 2100X1600X2000(A) | 2250 | 2″ |
| 10 | 145 | 11.42 | 403.1 | |||||||||
| 12.5 | 181 | 9.85 | 347.7 | 2200X1500X1800(W) | 1630 | |||||||
| SW-90A/W | 8 | 116 | 16.25 | 573.6 | 90 | 73 | 1 1/2″ | 20 | 180 | 2400X1600X2000(A | 2650 | 2 1/2″ |
| 10 | 145 | 14.55 | 513.6 | |||||||||
| 12.5 | 181 | 12.30 | 434.2 | 2200X1550X1800(W) | 2350 | |||||||
| SW-110A/W | 8 | 116 | 19.50 | 688.4 | 110 | 78 | 2″ | 24 | 180 | 3000X1700X2250(A) | 3150 | 2 1/2″ |
| 10 | 145 | 16.80 | 593.0 | |||||||||
| 12.5 | 181 | 15.15 | 534.8 | 2200X1550X1800(W) | 2460 | |||||||
| SW-132A/W | 8 | 116 | 22.52 | 795.0 | 132 | 78 | 2″ | 30 | 240 | 3000X1700X2250(A) | 3500 | 2 1/2″ |
| 10 | 145 | 20.30 | 716.6 | |||||||||
| 12.5 | 181 | 18.25 | 644.2 | 2200X1550X1800(W) | 2500 | |||||||
| SW-160W | 8 | 116 | 28.11 | 992.3 | 160 | 80 | 3″ | 35 | 240 | 2700X1800X2050 | 3700 | DN80 |
| 10 | 145 | 24.50 | 864.9 | |||||||||
| 12.5 | 181 | 22.15 | 781.9 | |||||||||
| SW-185W | 8 | 116 | 33.65 | 1187.8 | 185 | 80 | 3″ | 38 | 300 | 2700X1800X2050 | 3750 | DN80 |
| 10 | 145 | 28.5 | 1006.1 | |||||||||
| 12.5 | 181 | 24.5 | 864.9 | |||||||||
| SW-200W | 8 | 116 | 36.63 | 1293.0 | 200 | 80 | 4″ | 42 | 300 | 2700X1800X2050 | 3900 | DN100 |
| 10 | 145 | 32.75 | 1156.1 | |||||||||
| 12.5 | 181 | 27.50 | 970.8 | |||||||||
| SW-220W | 8 | 116 | 39.50 | 1394.4 | 220 | 80 | 4″ | 47 | 360 | 2700X1800X2050 | 4200 | DN100 |
| 10 | 145 | 35.80 | 1263.7 | |||||||||
| 12.5 | 181 | 29.50 | 1041.4 | |||||||||
| SW-250W | 8 | 116 | 40.50 | 1429.7 | 250 | 80 | 4″ | 58 | 360 | 2700X1800X2050 | 4600 | DN100 |
| 10 | 145 | 36.30 | 1281.4 | |||||||||
| 12.5 | 181 | 32.50 | 1147.3 | |||||||||
Note: air and water cooling.
Variable frequency technical parameters
| Model | Maximum Working Pressure | DURATION | KW Motor Power | dB noise | Cooling water inlet and outlet diameter | Cooling Water InletWater Temperature-Desaturation 32% | coolant L | Dimensiones L*W*H mm | Weight kg | Inch air outlet | ||
| bar | psig | m³/min | cfm | |||||||||
| SWVC-06A/W | 8 | 145 | 0.3-0.78 | 10.6-27.5 | 5.5 | 58 | 3/4″ | 1.5 | 10 | 800X800X1200 | 460 | 3/4″ |
| 10 | 145 | 0.2-0.65 | 7.1-22.9 | |||||||||
| SWVC-08A/W | 8 | 116 | 0.35-1.15 | 12.4-40.6 | 7.5 | 58 | 3/4″ | 2 | 10 | 800X800X1200 | 510 | 3/4″ |
| 10 | 145 | 0.3-1.02 | 10.6-36.0 | |||||||||
| 12.5 | 181 | 0.24-0.81 | 8.5-28.6 | |||||||||
| SWVC-11A/W | 8 | 116 | 0.54-1.55 | 19.1-54.7 | 11 | 60 | 1″ | 2.5 | 26 | 1150X755X1340 | 620 | 3/4″ |
| 10 | 145 | 0.45-1.32 | 15.9-46.6 | |||||||||
| 12.5 | 181 | 0.35-1.01 | 12.4-35.7 | |||||||||
| SWVC-15A/W | 8 | 116 | 0.75-2.30 | 26.5-81.2 | 15 | 63 | 1* | 3.5 | 26 | 1150X755X1340 | 670 | 3/4″ |
| 10 | 145 | 0.65-2.12 | 22.9-74.8 | |||||||||
| 12.5 | 181 | 0.6-1.60 | 21.2-56.5 | |||||||||
| SWVC-18A/W | 8 | 116 | 0.9-3.10 | 31.8-109.4 | 18.5 | 65 | 1″ | 4 | 30 | 1400X900X1450 | 730 | 1″ |
| 10 | 145 | 0.9-2.62 | 31.8-92.5 | |||||||||
| 12.5 | 181 | 0.6-2.10 | 21.2-74.1 | |||||||||
| SWVC-22A/W | 8 | 116 | 1.1-3.42 | 38.8-120.7 | 22 | 65 | 1″ | 5 | 30 | 1400X900X1450 | 780 | 1″ |
| 10 | 145 | 0.97-3.15 | 34.2-111.2 | |||||||||
| 12.5 | 181 | 0.85-2.62 | 30.0-92.5 | |||||||||
| SWVC-30A/W | 8 | 116 | 1.55-5.05 | 54.7-178.3 | 30 | 67 | 1 1/2″ | 7 | 40 | 1550X1150X-1550(A) | 1150 | 1 1/4″ |
| 10 | 145 | 1.26-4.20 | 44.5-148.3 | |||||||||
| 12.5 | 181 | 1.10-3.18 | 38.8-112.3 | 1500X1150X-1300(W) | ||||||||
| SWVC-37A/W | 8 | 116 | 1.91-6.10 | 67.4-215.3 | 37 | 67 | 1 1/2″ | 9 | 40 | 1550X1150X-1550(A) | 1200 | 1 1/4″ |
| 10 | 145 | 1.60-5.25 | 56.5-185.3 | |||||||||
| 12.5 | 181 | 1.42-4.85 | 50.1-171.2 | 1500X1150X-1300(W) | ||||||||
| SWVC-45A/W | 8 | 116 | 2.50-7.60 | 88.3-268.3 | 45 | 68 | 1 1/2″ | 10 | 90 | 1980X1300X-1760(A) | 1490 | 2″ |
| 10 | 145 | 1.91-6.15 | 67.4-217.1 | |||||||||
| 12.5 | 181 | 1.70-5.65 | 60.0-199.4 | 1800X1300X-1680(W) | ||||||||
| Model | Maximum Working Pressure | DURATION | KW Motor Power | dB noise | Cooling water inlet and outlet diameter | Cooling Water Inlet Water Temperature-Desaturation 32% | coolant L | Dimensiones L*W*H mm | WeiWeight kg | Inch air outlet | ||
| bar | psig | m³/min | cfm | |||||||||
| SWVC-55A/W | 8 | 116 | 3.0-9.60 | 105.9-338.9 | 55 | 70 | 1 1/2″ | 12 | 120 | 1980X1300X-1760(A) | 1570 | 2″ |
| 10 | 145 | 2.56-8.55 | 90.4-301.8 | |||||||||
| 12.5 | 181 | 2.30-7.45 | 81.2-263.0 | 1800X1300X-1680(W) | ||||||||
| SWVC-75A/W | 8 | 116 | 3.95-13.00 | 139.4-458.9 | 75 | 73 | 1 1/2″ | 18 | 120 | 2100X1600X-2000(A) | 2250 | 2″ |
| 10 | 145 | 3.40-11.42 | 120.0-403.1 | |||||||||
| 12.5 | 181 | 3.0-9.85 | 105.9-347.7 | 2200X1500X-1800(W) | 1750 | |||||||
| SWVC-90A/W | 8 | 116 | 5.0-16.25 | 176.5-573.6 | 90 | 73 | 1 1/2″ | 20 | 180 | 2400X1600X-2000(A) | 3150 | 2 1/2″ |
| 10 | 145 | 4.30-14.55 | 151.8-513.6 | |||||||||
| 12.5 | 181 | 3.72-12.30 | 131.3-434.2 | 2200X1550X-1800(W) | 2450 | |||||||
| SWVC-110A/W | 8 | 116 | 6.0-19.50 | 211.8-688.4 | 110 | 78 | 2″ | 24 | 180 | 3000X1700X-2250(A) | 3150 | 2 1/2″ |
| 10 | 145 | 5.07-16.80 | 179.0-593.0 | |||||||||
| 12.5 | 181 | 4.65-15.15 | 164.1-534.8 | 2200X1550X-1800(W) | 2580 | |||||||
| SWVC-132A/W | 8 | 116 | 6.75-22.52 | 238.3-795.0 | 132 | 78 | 2″ | 30 | 240 | 3000X1700X-2250(A) | 3500 | 21/2″ |
| 10 | 145 | 6.0-20.30 | 211.8-716.6 | |||||||||
| 12.5 | 181 | 5.07-18.25 | 179.0-644.2 | 2200X1550X-1800(W) | 2700 | |||||||
| SWVC-160A/W | 8 | 116 | 8.5-28.11 | 300.1-992.3 | 160 | 80 | 3″ | 35 | 240 | 2700X1800X2050 | 3900 | DN80 |
| 10 | 145 | 7.6-24.50 | 268.3-864.9 | |||||||||
| 12.5 | 181 | 6.7-22.15 | 236.5-781.9 | |||||||||
| SWVC-185W | 8 | 145 | 10-33.65 | 353.0-1187.8 | 185 | 80 | 3″ | 38 | 300 | 2700X1800X2050 | 4050 | DN80 |
| 10 | 145 | 8.72-28.5 | 307.8-1006.1 | |||||||||
| 12.5 | 181 | 7.75-24.5 | 273.6-864.9 | |||||||||
| SWVC-200W | 8 | 116 | 11.2-36.63 | 395.4-1293.0 | 200 | 80 | 4″ | 42 | 300 | 2700X1800X2050 | 4200 | DN100 |
| 10 | 145 | 9.68-32.75 | 341.7-1156.1 | |||||||||
| 12.5 | 181 | 9.2-27.50 | 324.8-970.8 | |||||||||
| SWVC-220W | 8 | 116 | 12.2-39.50 | 430.7-1394.4 | 220 | 80 | 4″ | 47 | 360 | 2700X1800X2050 | 4400 | DN100 |
| 10 | 145 | 11.2-35.80 | 395.4-1263.7 | |||||||||
| 12.5 | 181 | 9.0-29.50 | 317.7-1041.4 | |||||||||
| SWVC-250W | 8 | 116 | 13.5-40.50 | 476.6-1429.7 | 250 | 80 | 4″ | 58 | 360 | 2700X1800X2050 | 4800 | DN100 |
| 10 | 145 | 12.3-36.30 | 434.2-1281.4 | |||||||||
| 12.5 | 181 | 10.2-32.50 | 360.1-1147.3 | |||||||||
Application Area
Food industry, such as transportation, filling, packaging, and other processes.
In the medical field, gas is used in medicines, vaccines, etc., especially in hospitals.
In the textile industry, compressed air can affect the quality and hygiene of fabrics.
Process requirements such as the high-precision instrument industry and board manufacturing.
Laboratory applications, analytical tests, chemical tests, etc.