Gear Centrifuge Series For The Petrochemical Industry
DESCRIPTION
Magnetic suspension centrifugal air compressor
■ Customized order-taking production, customized order-taking according to pressure and ow, providing technical parameters according to requirements
■ ≤500KW, low voltage frequency conversion can be customized, frequency conversion range 20%
Features Introduction
■ Integral assembly, simple structure, compact layout
■ Provide 100% oil-free air
■ The three-stage compressor unit has high e ciency and low operating cost
■ Long-life single-shaft single-impeller rotor structure
■ High e ciency air cooler
■ Automatic control system with microprocessor as the core
■ Constant pressure control and automatic dual control
■ Simple operation, less daily maintenance
■ High-quality and perfect after-sales service and spare parts supply
■ The maintenance time is only one-seventh of the vertical split
■ The inspection of seals, bearings and gears only takes 2.5 hours
■ To check the gear bearing, just lift the upper cover
■ The whole process only takes 2.5 hours
■ High-e ciency ternary ow backward curved impeller
■ Use hard stainless steel material Armco 17.4 pH
■ Optimal parameter design
■ Each impeller is tested for 115% overspeed
■ Unique micro-spline connection, capable of delivering power up to 10,000 kW
■ Assembling and disassembling will not damage the parts
■ Air is sucked in from the air inlet
■ The air is compressed by the rst stage impeller
■ Heat and condensate are taken away in the rst-stage intercooler
■ The air is further compressed by the second stage
■ More heat and condensate are taken away in the second-stage intercooler
■ The air is compressed to the nal pressure in the third stage
■ The air is discharged from the outlet, passes through the aftercooler, and enters the user system after further cooling
Application Field
■ In the petrochemical industry, compressed air is used as an oxidation reaction gas to provide power, etc.
■ In the textile and chemical ber industry, compressed air a ects the quality and hygiene of the fabric, etc.
■ Aerospace industry, engine simulation wind tunnel, pneumatic component test system, etc.
■ Metal smelting industry, heat treatment, instrument gas, air separation nitrogen as protective gas, etc.
Technical Parameters
Working Environment
